Creating and Positioning a Sketch Design Intent

This time we will try to sketch yangdapat updated with a simple and fast.

The function of this part requires a triangular pocket located from a certain angled face.

By creating the sketch on the solid, the sketch position can update

automatically if the angle of the face changes.

Stcp 1 Open file

Step 2 Start the Modeling, application and make layer the work Iayer.

Step 3 Create a sketch of the pocket.

- Choose Sketch.

- Click on the sketch name, key in s2.1 pocket and press Enter..

- Select the larger top face of the block as the placement face.

By design, the pocket should be oriented with respect to the pad such that the

two legs of the triangle at right angles to each other can be

constrained as horizontal and vertical.

Label