Sitema work coordinate and machine coordinate system

As in other applications Unigraphics, the application uses the SCT Manufacturing,

Coordinate System or Labour, but also the SCM or System

Machine coordinates and RCS Reference Coordinate System.

> MB3 ® Choose Refresh to clear the viewport paths

machining.

The image looks like the SCT

coincides with the SCM. The SCM is

displayed very similar to the SCT,

naming the first axis

as XM, YM and ZM.

What is the significance of these coordinate systems to implement

Manufacturing. ?

SCT-All input parameters (for example, values for the Point of Beginning,

Z value for the Security Plan, or values I, J, K for the vector of the tool. And other

vector data) will be related to the SCT.

All SCM-coordinate values on the trajectories are related to

SCM. ZM axis SCM system is particularly important since if not

specifies a tool axis. ZM would be the default axis.

The exit path consists of a number of different commands. The command

is probably the most common linear movement positioning GOTO. there

than 6 fields in a GOTO coordinates: X, Y, Z, I, J and K. fields

X, Y and Z are the coordinates of the tip of the tool relative to the SCM and the values I, J and

K denote the vector of the axis of the tool.

Depending on the circumstances, it is preferable to locate both SCT and SCM systems

at the same point to avoid confusion.

Before creating any machining operation, it should display

both systems and verify their location and orientation.

Label