Sketch Curves Infer Constraint Settings
Senin, 04 April 2016
1 Komentar
Sketch curves are created via the Sketch Curve toolbar. As curves are
created geometric constraints are assigned to the curves relative to the Infer
Constraints Settings.
1 – Profile
2 – Line
3 – Arc
4 – Circle
Infer Constraint Settings
The Infer Constraints Settings dialog determines which constraints are
automatically created during curve creation. It is accessed by choosing
the Infer Constraint Settings icon from the Constraints toolbar or
Tools→Constraints→Infer Constraint Settings.
As you create the curves a symbol will appear near the curve being created to
represent the constraint that will be applied, if any.
Locking a Constraint
When a constraint symbol appears during curve creation you may lock in that
constraint by pressing MB2. For example, if you are creating a line and the
parallel symbol appears, press MB2. As you move the cursor, the new line
that is rubber banding is doing so parallel to the reference curve.
Practical Applications of NX
Student Guide
January 2006
MT10050 — NX 4
Publication Number
mt10050_g NX 4
Produced in the United States of America.
2 Practical Applications of NX
Student Guide
January 2006
MT10050 — NX 4
Publication Number
mt10050_g NX 4
Produced in the United States of America.
2 Practical Applications of NX
1 Komentar untuk "Sketch Curves Infer Constraint Settings "
Biaya desain rumah tinggal paket murah lengkap 3 jt bisa untuk kepengurusan imb dan pelaksanaan, gambar yang didapat :
1 view eksterior rumah tinggal
2 view interior rumah tinggal
Denah 2d rumah tinggal
Tampak 2d rumah tinggal
Potongan bangunan rumah tinggal
Rencana sanitasi rumah tinggal
Rencana listrik rumah tinggal
Rencana pondasi balok rumah tinggal
Rab rumah tinggal.
Posting Komentar